1. Skype Configuration Settings
2. Hyperterminal Windows Xp Configuration
3. Hyperterminal Configuration Windows 7

HTPE.EXE is a self-extracting archive file which contains the Hyperterminal setup program. At the DOS prompt, run HTPE.EXE to uncompress the setup program, and then type setup.exe, and the program will start the Hyperterminal installation.

HypertTerminal is Windows XP based application which helps you to communicate with COM ports, remote computers, Telnet websites, BBSs etc. Or to perform TCP/IP (Telnet) operations. It controls all your serial devices using the Ethernet or Modem.

Unfortunately, it is no longer available in Windows 7, Windows 8 and Windows 10. So, if you recently to Windows 7 or later versions from XP, you definitely miss the feature. To perform the same tasks (connect the computer to any remote computer), there are several alternatives for your current Windows version.

You don’t need to downgrade the OS for using HyperTerminal in Windows. To control other serial devices you can use HyperTerminal alternatives for secure shell access. To troubleshoot modems using Windows 7 or 10 computers, you can use PuTTy as an alternative of HyperTerminal.

However, there are valid points from Microsoft behind the discontinuing of Windows HyperTerminal service. The reasons are mentioned below in detail. The Removal of HyperTerminal from Windows 7/Windows 8/8.1 or Windows 10 – Reasons (Why). Shell access can be controlled using Windows PowerShell and ‘winrs’ command.

Alternatively one can use the ‘WINRS’ command direct from command prompt. Phone and Modems option is the alternative of HyperTerminal to troubleshoot any modems related problems. Open Control panel and navigate to Hardware and Sounds Phone and Modem Options. After specifying country, country code, area code etc.

You can troubleshoot the modem problems easily. From the Turn Windows features on or off one can enable Telnet client for Windows computer. Telnet is text based program to connect other PCs over the internet. These are the main reasons for why the HyperTerminal built-in Windows program has been removed. Use Original XP HyperTerminal on Windows 7, 8 or 10 Using Windows XP files If you are still a Windows 10/7 lover, upgrade the PC recently and still want to use the native HyperTerminal program of Windows XP, here is a solution for you.

You can copy the system files ( hypertrm.exe and hypertrm.dll) associated with the Windows XP HyperTerminal program, and use it with the current edition of Windows OS. Let’s see how. Open Windows XP computer and navigate to the below path and copy the files to a.

C: Program Files Windows NT hypertrm.exe C: WINDOWS system32 hypertrm.dll Then save these files in a folder of your Windows 7/8.1 or Windows 10 PC. Double click the ‘hypertrm.exe’ file to execute the HyperTerminal program on your latest Windows computer. Alternatives of HyperTerminal for Windows 10/8.1/7 You can also try various HyperTerminal alternatives to give a try on your PC. Here, I mention popular and useful among these. PuTTy: is a free, open source windows based terminal emulator which is probably the best HyperTerminal alternative.

It is the combination of Telnet and SSH. You need to have a COM port to use the PuTTy. “DB9 to USB converter” can work well if you don’t have an in build COM port. Configure the software to make a use of it. Hyperterminal Private Edition: This is a paid HyperTerminal version to manage TCP/IP, COM ports, and dial-up modems.

It is a commercial edition which allows you to chat directly to different devices using the serial COM ports. Final Words: HyperTerminal is no longer available in the latest version of Windows OS. There are many similar alternatives available on the internet. However, you can use the old Windows XP files to access the original HyperTerminal Windows 7/10 edition. Otherwise, try to use Putty or any other paid edition to take maximum benefits of the Windows HyperTerminal feature.

Microsoft HyperTerminal is a small program that comes with Microsoft Windows. You can use it to send AT commands to your mobile phone or GSM/GPRS modem. It can be found at Start - Programs - Accessories - Communications - HyperTerminal. If you cannot find it and you are using Windows 98, then probably you have not installed it. You can go to Control Panel - Add/Remove Programs - Windows Setup tab - Communications list box item - Details button to install MS HyperTerminal. Before you start programming your SMS application, you may want to check if your mobile phone, GSM/GPRS modem and SIM card are working properly first. The MS HyperTerminal is a handy tool when it comes to testing your GSM devices.

It is a good idea to test your GSM devices beforehand. When a problem occurs, sometimes it is difficult to tell what causes the problem.

The cause can be your program, the GSM device or the SIM card. If you test your GSM device and SIM card with MS HyperTerminal and they operate properly, then it is very likely that the problem is caused by your program. For Linux users, minicom can be used instead of HyperTerminal. The Procedure for Sending AT Commands to a Mobile Phone or GSM/GPRS Modem Using MS HyperTerminal To use MS HyperTerminal to send AT commands to your mobile phone or GSM/GPRS modem, you can follow the procedure below:.

Put a valid SIM card into the mobile phone or GSM/GPRS modem. You can obtain a SIM card by subscribing to the GSM service of a wireless network operator. Connect your mobile phone or GSM/GPRS modem to a computer and set up the corresponding wireless modem driver. You should find the wireless modem driver in the CD or disk that was provided by the manufacturer. If the manufacturer does not provide such CD or disk with your mobile phone or GSM/GPRS modem, you can go to the manufacturer's web site and see whether the wireless modem driver can be downloaded there. If the wireless modem driver cannot be found on the web site, you can still use Windows' standard modem driver.

Run MS HyperTerminal by selecting Start - Programs - Accessories - Communications - HyperTerminal. In the Connection Description dialog box, enter a name and choose an icon you like for the connection. Then click the OK button. The screenshot of MS HyperTerminal's Connection Description dialog box in Windows 98. In the Connect To dialog box, choose the COM port that your mobile phone or GSM/GPRS modem is connecting to in the Connect using combo box.

For example, choose COM1 if your mobile phone or GSM/GPRS modem is connecting to the COM1 port. Then click the OK button. (Sometimes there will have more than one COM port in the Connect using combo box. To know which COM port is used by your mobile phone or GSM/GPRS modem, follow the procedure below: In Windows 98: Go to Control Panel - Modem. Then click the Diagnostics tab. In the list box, you can see which COM port the mobile phone or GSM/GPRS modem is connected to. How to download minecraft java edition.

Skype Configuration Settings

In Windows 2000 and Windows XP: Go to Control Panel - Phone and Modem Options. Then click the Modems tab. In the list box, you can see which COM port the mobile phone or GSM/GPRS modem is connected to.) Figure 6. The screenshot of MS HyperTerminal's Connect To dialog box in Windows 98.

The Properties dialog box comes out. Enter the correct port settings for your mobile phone or GSM/GPRS modem.

Hyperterminal Windows Xp Configuration

Then click the OK button. (To find the correct port settings that should be used with your mobile phone or GSM/GPRS modem, one way is to consult the manual of your mobile phone or GSM/GPRS modem.

Another way is to check the port settings used by the wireless modem driver that you installed earlier. To check the port settings used by the wireless modem driver on Windows 98, follow these steps: a.

Go to Control Panel - Modem. Select your mobile phone or GSM/GPRS modem in the list box. Click the Properties button. The Properties dialog box appears. The Maximum speeds field on the General tab corresponds to HyperTerminal's Bits per second field. Click the Connection tab and you can find the settings for data bits, parity and stop bits.

Click the Advanced button and you can find the setting for flow control. To check the port settings used by the wireless modem driver on Windows 2000 and Windows XP, follow these steps: a. Go to Control Panel - Phone and Modem Options - Modems tab.

Select your mobile phone or GSM/GPRS modem in the list box. Click the Properties button. The Properties dialog box appears. Click the Advanced tab and then click the Change Default Preferences button. The Change Default Preferences dialog box appears. The Port speed field on the General tab corresponds to HyperTerminal's Bits per second field. You can also find the setting for flow control on the General tab.

On the Advanced tab, you can find the settings for data bits, parity and stop bits.) Figure 7. The screenshot of MS HyperTerminal's Properties dialog box in Windows 98. Type 'AT' in the main window. A response 'OK' should be returned from the mobile phone or GSM/GPRS modem. Type 'AT+CPIN?' In the main window. The AT command 'AT+CPIN?'

Is used to query whether the mobile phone or GSM/GPRS modem is waiting for a PIN (personal identification number, i.e. If the response is '+CPIN: READY', it means the SIM card does not require a PIN and it is ready for use.

Hyperterminal Configuration Windows 7

If your SIM card requires a PIN, you need to set the PIN with the AT command 'AT+CPIN='. The screenshot of MS HyperTerminal's main window in Windows 98. If you get the responses above, your mobile phone or GSM/GPRS modem is working properly. You can start typing your own AT commands to control the mobile phone or GSM/GPRS modem. Further details about how to use AT commands to send and receive SMS messages will be provided in the following sections.